System information

12-290
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter description
scsirouter description
To add user-defined identification information to the named SCSI routing instance, use the
scsirouter description command.
scsirouter name description “user text”
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines The scsirouter description command allows you to add a new description or change an existing
description. Descriptions are site-specific.
Examples The following example adds the description “Access to WebServer4 WebServer5” to the SCSI routing
instance foo1:
[SN5428-2A]# scsirouter foo1 description “Access to WebServer4 WebServer5”
Related Commands
name The name of this SCSI routing instance.
“user text” User-defined identification information associated with this SCSI routing
instance. If the string contains spaces, enclose it in quotes. Enter a
maximum of 64 characters.
Release Modification
3.2.1 This command was introduced.
Command Description
delete scsirouter Delete the named SCSI routing instance or the specified element of the
SCSI routing instance.
restore scsirouter Restore the named SCSI routing instance from the named configuration file.
save scsirouter Save configuration information for the named SCSI routing instance.
scsirouter Create a SCSI routing instance.
scsirouter enable Stop or start the named SCSI routing instance.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
setup scsi Run the wizard to configure a SCSI routing instance.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.