System information

12-276
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
save fcip
save fcip
To save all configuration data associated with the named FCIP instance to nonvolatile memory, use the
save fcip command.
save fcip {name |all} {filename | bootconfig}
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines You must save configuration data from the running configuration to the bootable configuration for it to
be retained in the storage router when it is restarted. Configurations saved to a file can be moved between
storage routers and can be restored at a later time.
Examples The following example saves all FCIP instances currently running on this SN 5428-2 to the bootable
configuration, used when the storage router is restarted:
[SN5428-2A]# save fcip all bootconfig
The following example saves the FCIP instance named fcip1 to the file named fcip_SN5428-2A:
[SN5428-2A]# save fcip fcip1 fcip_SN5428-2A
Related Commands
name The name of the FCIP instance. Valid names are fcip1 and fcip2.
all Save configuration data for all FCIP instances.
filename The name of the file where the configuration data will be written. This file
is stored in the savedconfig directory.
bootconfig Save the FCIP instance from the running configuration to the bootable
configuration, used when the SN 5428-2 Storage Router is restarted.
Release Maintenance
3.3.1 This command was introduced.
Command Description
fcip Create an FCIP instance.
fcip enable Stop or start the named FCIP instance.
restore fcip Restore the named SCSI routing instance from the named configuration file.
show fcip Display configuration and operational information for the named FCIP
instance.