System information

12-273
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
save accesslist
Examples The following example saves the current configuration for all access lists to the bootable configuration,
used when the storage router is restarted:
[SN5428-2A]# save accesslist all bootconfig
The following example saves the access list fooList to a configuration file named fooList_SN5428-2A:
[SN5428-2A]# save accesslist fooList fooList_SN5428-2A
Related Commands Command Description
accesslist Create an access list entity.
accesslist A.B.C.D/bits Add IP addresses to an access list.
delete accesslist Delete a specific access list entry or an entire access list.
delete savedconfig Remove a saved configuration file from the storage router.
restore accesslist Restore the named access list or all access lists from the named
configuration file.
save aaa Save the current AAA configuration information.
save all Save all configuration information.
save scsirouter Save configuration information for the named SCSI routing instance.
save system Save selected system configuration information.
save vlan Save configuration information for the named VLAN or all VLANs.
scsirouter target
accesslist
Associate an access list with a specific SCSI routing instance target or all
targets.
show accesslist Display the contents of the named access list or all access lists.
show savedconfig List the contents of the savedconfig directory or the contents of the named
configuration file.