System information

12-157
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch zoning merge
Related Commands Command Description
clear fcswitch Clear the switch log files of all entries or clear stored zoning configuration
information.
fcswitch domainid Set the domain ID for the storage router, to be used for FC switched fabric
zoning.
fcswitch enable Enable all FC interfaces.
fcswitch interop-credit Set the data buffer credit capacity for all FC ports.
fcswitch zoning
autosave
Enable the SN 5428-2 Storage Router to save zoning changes received from
switches in the fabric.
fcswitch zoning
default
Select the level of communication between the storage router and devices in
the fabric where there is no active zone set.
interface fc? diag Set the named FC interface into diagnostic mode for testing purposes.
interface fc? enable Enable the named FC interface.
interface fc? loopback Initiate a loopback test on the named FC interface.
show fcswitch Display global configuration information for storage router FC interfaces.
zone Create a Fibre Channel fabric zone.
zoneset Create a Fibre Channel fabric zone set.
zoneset enable Activate a zone set.