System information

12-152
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch zoning autosave
fcswitch zoning autosave
To enable the SN 5428-2 Storage Router to automatically save zoning changes received from switches
in the fabric, use the fcswitch zoning autosave command. To prevent the storage router from saving
zoning changes, use the no form of this command.
fcswitch zoning autosave enable
no fcswitch zoning autosave enable
Syntax Description
Defaults The storage router saves zoning changes by default.
Command Modes Administrator.
Command History
Usage Guidelines By default, the SN 5428-2 Storage Router can merge into existing FC switched fabric zones and
participate in the zoning. Use the no form of this command, in conjunction with the fcswitch domainid
command with the lock keyword to prevent the storage router from participating in FC switched fabric
zones.
Examples The following example prevents the storage router from participating in FC switched fabric zones. The
first command prevents the storage router from saving zoning changes received from switches in the
fabric, and the second command locks the domain ID, preventing the FC switched fabric from making
changes to that value.
[SN5428-2A]# no fcswitch zoning autosave enable
[SN5428-2A]# fcswitch domainid lock enable
autosave enable Enables the storage router to save zoning changes received from switches in
the fabric to non-volatile memory. This is the default.
Release Modification
3.2.1 This command was introduced.