System information

12-144
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch fstov
fcswitch fstov
To specify the fabric services timeout value, use the fcswitch fstov command.
fcswitch fstov {nn |default}
Syntax Description
Defaults The default fabric stability timeout value is 1000 milliseconds.
Command Modes Administrator.
Command History
Usage Guidelines Use this command to specify the number of milliseconds the storage router will wait for fabric services.
Examples The following example sets the fabric services timeout value to 5000 milliseconds:
[SN5428-2A]# fcswitch fstov 5000
The following example resets the fabric services timeout value to the default of 1000 milliseconds:
[SN5428-2A]# fcswitch fstov default
Related Commands
nn The amount of time the storage router is to wait for fabric services, in
milliseconds.
default Keyword, indicating the storage router will wait for 1000 milliseconds for
fabric services.
Release Modification
3.2.1 This command was introduced.
Command Description
fcswitch dstov Specify the amount of time the storage router is to wait for Fibre Channel
Distributed Services.
fcswitch edtov Specify an error detect timeout value for all Fibre Channel interfaces.
fcswitch enable Enable all FC interfaces.
fcswitch ratov Specify a Fibre Channel resource allocation timeout value for the storage
router.
show fcswitch Display global configuration information for storage router FC interfaces.