System information

12-142

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 12 Command Line Interface Reference

fcswitch enable

To enable all Fibre Channel (FC) interfaces, use the fcswitch enable command. To disable all FC

interfaces, use the no form of this command.

fcswitch enable

no fcswitch enable

Syntax Description This command has no arguments or keywords.

Defaults All FC interfaces are enabled, by default.

Command Modes Administrator.

Command History

Usage Guidelines An FC interface must be enabled to allow access to storage targets or perform online loopback testing.

Use this command to enable all FC interfaces at one time.

If you experience problems with FC storage, use the no form of this command to quickly disable all FC

interfaces at once.

Examples The following example enables all FC interfaces and then performs an online loopback test for the FC

interface named fc6:

[SN5428-2A]# fcswitch enable

[SN5428-2A]# interface fc6 loopback online

The following example disables all FC interfaces.

[SN5428-2A]# no fcswitch enable

Release Modification

3.2.1 This command was introduced.