Specifications

6-3
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 6 Configuring SCSI Routing
Configuration Tasks
Figure 6-1 Configuration Elements for SCSI Routing
GbE interface
Fibre Channel interfaces
Specifies IP host(s) allowed
to access a common set of
storage resources via the
SN 5428-2 Storage Router
SN 5428-2 Storage Router configured for SCSI routing
Access list
IP
SCSI routing instance
Access
Server
interface(s)
iSCSI driver
85737
IP address of
SCSI routing
instance
IP host
IP host
IP host
FC storage
iSCSI
targets
Identifier(s) -
IP Addresses,
CHAP user name,
or
iSCSI name
Specifies (a) the primary SN 5428-2
Gigabit Ethernet interface that the SCSI
routing instance will use to
communicate with IP hosts (b) The IP
address of the server interface for the
SCSI routing instance and (c) an
optional secondary Gigabit Ethernet
interface that can be used for the IP
address if the primary is not available
Specifies iSCSI target
names and LUNs, and
mapping to the physical
storage addresses
(controllers and LUNs)
Control of access between
IP hosts and targets