Specifications

5-5
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 5 Configuring Fibre Channel Interfaces
Configuring the Domain ID
Internal FC Ports
There are two internal FC ports in the SN 5428-2, initiator WWPN1 and initiator WWPN2. These two
initiator ports identify the SN 5428-2 to the switched fabric. Both initiator WWPN1 and WWPN2 are
required by your zone administrator to allow participation in zoning.
To include the SN 5428-2 in FC zoning, both ports (WWPN1 and WWPN2) must be included in the zone
set. A default alias of iscsi is provided that contains both initiators WWPN1 and WWPN2.
Use the following procedure to display initiator WWPN1 and initiator WWPN2 and the iscsi alias.
Example 5-2 Display Initiator WWPN1 and WWPN2
[SN5428-2A]# show fcswitch
Global attributes Value
------------------------------------ -----
Domain ID 99
Domain ID lock disabled
Active Zoneset None
Zoning Merge SW2
Zoning Default All
Zoning Autosave enabled
Distributed Services timeout (dstov) 5000
Fabric Services timeout (fstov) 1000
Error Detect timeout (edtov) 2000
Resource Allocation timeout (ratov) 10000
Buffer to Buffer Credit (interop) 12
Initiator WWPN1 280000048aa58710
Initiator WWPN2 290000048aa58710
Example 5-3 Display “iscsi” Alias
[SN5428-2A]# show fcalias all
Alias Name Member type Member value
-------------------- ----------- ------------
iscsi wwpn 280000048aa58710
wwpn 290000048aa58710
Command Description
Step 1
enable Enter Administrator mode.
Step 2
show fcswitch Display FC operational information (Example 5-2).
Step 3
show fcalias all Display iscsi alias information (Example 5-3)