Specifications

Index
IN-11
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
M
management
configuring GbE IP address for
12-190
specifying secondary GbE interface 12-190
management interface
clearing counters
12-49
clusters and 3-4
configuring 3-4, 12-197, 12-199
management session
setting time out value
12-336
starting 2-12
management station
FCIP and
1-16
SCSI routing and 1-6
transparent SCSI routing and 1-12
managing the storage router 11-1 to 11-37
mapping storage
SCSI routing and
1-6
target-and-LUN examples (table) 1-7
target-and-LUN using LUN ID addressing 6-8
target-and-LUN using serial number addressing 6-9
target-and-LUN using WWPN addressing 6-8
target-only examples (table) 1-7
target-only using WWPN addressing 6-10
transparent SCSI routing and 1-12
memory, displaying 12-461
merging cluster configuration data 12-345
message notification levels 11-30
messages
about
11-29
filtering 11-31
routing 11-31
model number 5428-2-K9 ix
monitor
mode
2-13, 3-8, 12-106
password, configuring 3-8
monitor password command 3-8, 12-228
MTU size
specifying for GbE interfaces
12-188
specifying for VLAN 4-4
verifying 4-6
multiple IP address 1-3
N
network management access
configuring
3-7
SNMP, configuring 3-7
no aaa authentication enable command 12-3
no aaa authentication iscsi command 12-5
no aaa authentication login command 12-8
no aaa group server radius command 12-12
no aaa group server radius server command 12-16
no aaa group server tacacs+ command 12-18
no aaa group server tacacs+ server command 12-20
no aaa new-model command 12-22
no cdp enable command 12-40
no cdp holdtime command 12-41
no cdp interface command 11-27, 12-42
no cdp timer command 12-43
no debug aaa command 12-64
no debug fcip command 12-67
no debug interface ge? command 12-74
no debug ip rip command 12-76
no debug scsirouter command 12-78
no debug scsirouter iscsitrace command 12-79
no debug scsirouter target command 12-81
no fcip enable command 12-128
no fcswitch beacon enable command 12-133
no fcswitch devlog enable command 12-136
no fcswitch domainid command 12-138
no fcswitch enable command 12-142
no fcswitch syslog enable command 12-151
no fcswitch zoning autosave command 12-152
no interface fc? al-fairness command 12-162
no interface fc? enable command 12-168