Specifications

12-562
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
vtp mode
When operating in transparent mode, the storage router ignores any VTP packets it may receive. VLANs
are configured using the GUI or the CLI vlan command. Use transparent mode when the storage router
is connected to a switched network that does not support VTP but does support 802.1Q VLANs.
Examples The following example places the storage router in VTP Transparent mode:
[SN5428-2A]# vtp mode transparent
Related Commands Command Description
restore vlan Restore VLAN configuration information from the named configuration
file.
save all Save all configuration information, including VLAN information.
save scsirouter Save configuration information for the named SCSI routing instance.
save system Save selected system configuration information, including VLAN
information.
save vlan Save configuration information for the named VLAN or all VLANs.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
show vlan Display configuration and operational information for the specified VLAN
or all VLANs.
show vtp Display configuration and operational information for VTP.
vlan Configure a non-VTP VLAN on the storage router.
vtp domain Assign a VTP domain name to the storage router.