Specifications

12-513
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show vlan
Examples The following is example output from the show vlan command, followed by example output from the
show vlan config command for the VLAN ID 101:
[SN5428-2A]# show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
101 vlanfoo1 active ge1, ge2
102 vlanfoo2 active ge2
VLAN Type MTU Interfaces
---- ----- ----- -------------------------------
101 enet 1500 ge2VLAN101
102 enet 1500 ge2VLAN102
[SN5428-2A]# show vlan id 101 config
vlan 101 name vlanfoo1 mtu 1500
Related Commands Command Description
restore vlan Restore VLAN configuration information from the named configuration
file.
save all Save all configuration information, including VLAN information.
save scsirouter Save configuration information for the named SCSI routing instance.
save system Save selected system configuration information, including VLAN
information.
save vlan Save configuration information for the named VLAN or all VLANs.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
show vtp Display configuration and operational information for VTP.
vlan Configure a non-VTP VLAN on the storage router.
vtp domain Assign a VTP domain name to the storage router.
vtp mode Configure the storage router to operate in client or transparent VTP mode.