Specifications

12-509
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show telnet
show telnet
To display the status of the SN 5428-2 Storage Router Telnet server, use the show telnet command.
show telnet
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator and Monitor.
Command History
Usage Guidelines Use this command to display the status of the Telnet server. The Telnet server is enabled and running on
the storage router by default. If the Telnet server is enabled, you can still restrict Telnet access to the
storage router for specific interfaces by using the restrict command.
Examples The following is example output from the show telnet command:
[SN5428-2A]# show telnet
Telnet Server Configuration
Status: enabled
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
restrict Secure access to storage router interfaces by communications protocols and
services.
telnet enable Enable Telnet and start the Telnet server.