Specifications

12-500
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show system
The following is example output from the show system from bootconfig command:
!
! SYSTEM
!
hostname SN5428-2A
!
! Mgmt Port
!
interface mgmt ip-address 10.1.10.244/255.255.255.0
!
! HA Port
!
interface ha ip-address 10.1.20.56/255.255.255.0
!
! GE
!
interface ge1 autonegotiation autodetect
interface ge1 mtusize 1500
interface ge1 vlan enable
!
! GE
!
interface ge2 autonegotiation autodetect
interface ge2 mtusize 1500
interface ge2 vlan enable
!
! ROUTES
!
ip default-gateway 10.1.10.201
ip route 10.1.30.0/255.255.255.0 10.1.10.201
!
! RIP
!
no ip rip enable
ip rip timers invalid 180
!
! ADMIN LOGIN
!
admin password <password>
!
! MONITOR LOGIN
!
monitor password <password>
!
! SNTP
!
ntp peer 10.1.60.86
clock timezone Etc/GMT+6
!
! SNMP
!
snmp-server community public ro
snmp-server community private rw
no snmp-server host all traps
no snmp-server sendauthtraps
snmp-server linkupdown mgmt
snmp-server linkupdown ha
snmp-server linkupdown fei2
snmp-server linkupdown fci1
snmp-server linkupdown fci2
snmp-server linkupdown ge1
snmp-server linkupdown ge2
snmp-server linkupdown fc0