Specifications

12-497

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 12 Command Line Interface Reference

show static

To display the currently configured IP host to Fibre Channel (FC) address mappings saved in the storage

router, use the show static command. This command is only available when the storage router is

deployed for static transparent SCSI routing.

show static iscsibindings

Syntax Description

Defaults None.

Command Modes Administrator and Monitor.

Command History

Usage Guidelines When the storage router is deployed for static transparent SCSI routing, the IP host to FC address

mappings are saved and retained in the storage router when it is restarted. Use the

show static iscsibindings command to display the mappings that are currently configured in the storage

router.

Examples The following example displays the currently configured mappings:

[SN5428-2A]# show static iscsibindings

Interface WWPN Host IP Address Host Name

--------- ---------------- ---------------- -------------------------------

fci1 280100065338d6c0 10.1.20.2 iscsi.cisco.testlab

fci1 280200065338d6c0 10.1.4.213 iqn.1987-05.com.cisco.02.0AB08....B6E5CCE.WIN1

fci2 290100065338d6c0 10.1.30.100 iqn.1987-05.com.cisco.02.9FD389....36D3D3.NT10

Related Commands

iscsibindings Display the IP host to FC mappings that are currently configured in the

storage router.

Release Modification

3.3.1 This command was introduced.

Command Description

clear static Clear the mapping of the IP host to Fibre Channel (FC) address for the

specified WWPN.