Specifications

12-483
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show scsirouter
The following is example output from the show scsirouter all host table command. If you are going to
use iSCSI Name entries for access control, you can configure your IP hosts and attempt to access the
desired SCSI routing instance. Then issue this command to display the iSCSI Name information, which
can be used to populate the desired access list.
[SN5428-2A]# show scsirouter all host table
Name: iqn.1987-05.com.cisco.01.27a2410eaed4affa82a81143d70ce10
Alias: lab1
IP: 10.2.0.23
CHAP username: 742Nlab1
The following is example output from the show scsirouter all failover command. This command
displays both configured and current operational failover information for all the SCSI routing instances
in the cluster. Table 12-36 describes the significant fields in this display.
[SN4528-2A]# show scsirouter all failover
Each [ ] below contains node operating characteristics for a scsirouter.
[Instance Status, Failover Priority, Eligibility]
Instance Status(’M’ = Master, ’ ’ = Slave)
Failover Priority(’ ’ = none, ’fp’ = primary, ’fs’ = secondary)
Eligibility(U = Eligibility has not been initialized
N = None of the configured devices are available or
a configured interface is unavailable
S = Some of the configured devices are available
A = All of the configured devices are available
P = Primary and all of the configured devices are available)
Configured Configured
Configured Failover Failover This Failover
Scsirouter Primary Primary Secondary Node Node List
---------- ---------- ---------- ---------- -------- ----------------
R1 none none none [ A] [MfpA] SN5428-2B
R2 SN5428-2A none none [M P] [ A] SN5428-2B
R3 SN5428-2A none none [M P] [ S] SN5428-2B
R4 SN5428-2A none none [M P] [ N] SN5428-2B
Table 12-36 Description of Fields in the “show scsirouter all failover” Command Output
Field Description
Scsirouter The name of the SCSI routing instance in the cluster.
Configured Primary The name of the storage router configured as the primary for
the SCSI routing instance, if any.
Configured Failover Primary If a failover list has been explicitly configured for the SCSI
routing instance, the first storage router in the list.
Configured Failover Secondary If a failover list has been explicitly configured for the SCSI
routing instance, the second storage router in the list.
This Node The instance status, failover priority and eligibility
information for the storage router from which the command
was issued.
Failover Node List The instance status, failover priority and eligibility
information for the indicated node, in the order that the nodes
appear in the failover list.