Specifications

12-447
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show interface
• Use the show interface if-name stats command to display operational statistics related to the
specified interface. This information can include packets received and transmitted, collisions,
octets, multicast packets, dropped and unsupported protocol, exception status IOCBs (such as LIP
reset aborts, port unavailable or logged out, DMA errors, port configuration changed, command
timeout, data overrun, write or read data underrun, and queue full), Fibre Channel (FC) errors, and
other general events.
Examples The following is example output from the show interface command:
[SN5428-2A]# show interface
Operational Data
Interface Stat IP/Netmask MAC Options
--------- ---- ------------------------ ------------ -------
lo0 up 127.0.0.1/ff000000 000000000000 type Loopback
mtu 32768
speed 0
flags UP LOOPBK RUNNING MLTCST
mgmt up 10.1.10.244/ffffff00 00023d070cc0 type Ethernet
mtu 1500
speed 100000000
flags UP BRDCST RUNNING MLTCST
ha up 10.1.20.56/ffffff00 00023d070cc1 type Ethernet
mtu 1500
speed 100000000
flags UP BRDCST RUNNING MLTCST
fei2 up 2.0.0.1/ffffff00 00065338bc22 type Ethernet
mtusize 1500
speed 100000000
flags UP BRDCST RUNNING MLTCST
fc0 up type Fibre Channel
OperState enabled
PortID 010000
WWN 200000059ba69821
LinkSpeed 2Gb/s
LinkState Active
SyncState SyncAcquired
LoginStatus LoggedIn
Loopback Status Not Running
MaxCredit 12
DonatedToPort None
RunningType f-port
PendingType f-port
InBandMgmt enabled
SFPType NotApplicable
SFPVendor N/A
SFPVendorID N/A
SFPPartNumber N/A
SFPRev N/A
Table 12-31 Valid Interface Names
Interface Name Description
fc? The FC interface, for example fc1 or fc5.
fci? The internal FC interface, for example fci1 or fci2.
ge? The Gigabit Ethernet interface, for example, ge1 or ge2.
ha The high availability interface.
mgmt The management interface.