Specifications

12-437
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show fcswitch linkstate
show fcswitch linkstate
To display information about the SN 5428-2 Storage Router link state database, use the
show fcswitch linkstate command.
show fcswitch linkstate database
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use this command to display link state information for each FC interface, including the initiator
interfaces (fc0 and fc15).
Examples The following is output from the show fcswitch linkstate command:
[SN5428-2A]# show fcswitch linkstate database
Local Node WWN 100000059ba69821
Local Port 15
Local Port WWN 200f00059ba69821
Remote Node WWN 100000059ba69820
Remote Port ffffffff
Remote Port WWN 290000059ba69820
Remote Agent Address 00000000
Remote Agent Type 0
Remote Agent Port 0
Remote Unit Type Unknown
Remote Connection Id 0000ef
Local Node WWN 100000059ba69821
Local Port 0
Local Port WWN 200000059ba69821
Remote Node WWN 100000059ba69820
Remote Port ffffffff
Remote Port WWN 280000059ba69820
Remote Agent Address 00000000
Remote Agent Type 0
Remote Agent Port 0
Remote Unit Type Unknown
Remote Connection Id 4f0000
database Display current link information for all Fibre Channel (FC) ports.
Release Modification
3.2.1 This command was introduced.