Specifications

12-434
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show fcswitch global-nameserver
show fcswitch global-nameserver
To display the Fibre Channel (FC) fabric nameserver database, use the
show fcswitch global-nameserver command.
show fcswitch global-nameserver {all | brief}
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines All devices in a fabric are assigned a unique 24-bit public address by the fabric. The fabric also maintains
a database of all the devices and their addresses. The database is called the fabric nameserver, and is
used by host connections to determine the devices that they can communicate with.
Use this command to display the fabric nameserver database.
Examples The following is example output from the show fcswitch global-nameserver brief command. A table
of information, including domain ID, displays for each switch in the fabric.
[SN5428-2A]# show fcswitch global-nameserver brief
domainId = 1
Port Id Port Type Port Number Port WWN Port IP Address
------- ------- --------------- ----------------- -----------------
010000 N 0 280000054227b610 00000000
0105c1 NL 5 21000003be64e2aa 00000000
0105c2 NL 5 21000003be64e2ac 00000000
0105c3 NL 5 21000003be3a6dc1 00000000
0105c4 NL 5 21000003be64e03b 00000000
0105c5 NL 5 21000003be64e25c 00000000
0105c6 NL 5 21000003be64e252 00000000
010f00 N 15 290000054227b610 00000000
8 entries found for domain id 1
all Display the fabric nameserver database.
brief Display abbreviated information from the fabric nameserver database.
Release Modification
3.2.1 This command was introduced.