Specifications

3-2

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 3 Configuring System Parameters

Configuration Tasks

To configure system parameters on your SN 5428-2 Storage Router, perform the following steps:

Step 1 Configure the management interface.

Step 2 Configure the time and date.

Step 3 (Optional) Configure IP routes.

Step 4 (Optional) Configure network management access.

Step 5 Configure passwords.

Step 6 (Optional) Configure administrator contact information.

Step 7 (Optional) Configure the high-availability (HA) interface.

Step 8 (Optional) Configure for Secure Shell (SSH) access.

Step 9 Verify and save configuration.

Note You can verify and save the configuration (by using the save system bootconfig or save all

bootconfig command) at any point in the process of performing the configuration tasks.

Figure 3-1 illustrates the example configuration used in this chapter.