Specifications

12-399
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cpu
show cpu
To display CPU utilization information, use the show cpu command.
show cpu
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use this command to view the percentage of CPU utilization for the last five seconds, the last minute,
and the last five minutes. The show cpu command is designed for debug purposes, and should be used
under the guidance of a Cisco Technical Support professional.
Examples The following is example output from the show cpu command:
[SN5428-2A]# show cpu
CPU Utilization for last 5 seconds: 1%; last 1 minute: 2%; last 5 minutes: 2%
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
show buffers Display information about buffer pools.
show memory Display information about memory and related resources.
show stack Display the memory stack on a per-task basis.
show tech-support Display a variety of diagnostic information for use by Cisco Technical
Support professionals.