Specifications

12-390
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cdp neighbors
Table 12-23 describes the significant fields shown in the display.
Related Commands
Table 12-23 Description of Fields in the “show cdp neighbors detail” Command Output
Field Description
Device-ID The name of the neighbor device and either the MAC address or the
serial number of this device.
Entry address(es) A list of network addresses of neighbor devices.
IP address The IP address of the neighboring device.
Platform The product number of the device.
Capabilities The device type of the neighbor. This device can be a router, a bridge,
a transparent bridge, a source-routing bridge, a switch, a host, an IGMP
device, or a repeater.
Interface The storage router interface used to connect to this neighbor.
Remote Port The outgoing port number.
Holdtime The remaining amount of time (in seconds) the current device will hold
the CDP advertisement from a sending device before discarding it.
Version The software version of the neighbor device.
advertisement version The CDP advertisement version.
VTP Management Domain The name of the VTP management domain.
Native VLAN The native VLAN identification number.
Duplex The duplex state of the connection between the storage router and the
neighbor device.
Command Description
cdp enable Enable or disable CDP on the SN 5428-2 Storage Router.
cdp holdtime Specify the amount of time the receiving device should hold a CDP packet
from the SN 5428-2 Storage Router before discarding it.
cdp interface Switch CDP on or off for the specified interface.
cdp timer Specify the amount of time between transmissions of CDP packets from the
SN 5428-2 Storage Router.
show cdp Display global CDP configuration information for the storage router.
show cdp entry Display information about a specific neighbor device listed in the CDP
neighbors table.
show cdp interface Display information about the interfaces on which CDP is enabled.
show cdp traffic Display information about traffic between devices gathered using CDP.