Specifications

12-389
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cdp neighbors
Table 12-22 describes the significant fields shown in the display.
The following is sample output for one neighbor from the show cdp neighbors detail command. The
output includes additional information about the neighbor, including network address, enabled
protocols, and software version.
[SN5428-2A]# show cdp neighbors detail
----------------------------------------
Device ID: TRC0448016Q(lab-sn5428-2a.mlab.com)
Entry address(es):
IP address: 10.2.0.83
Platform: WS-C6509, Capabilities: Trans-Bridge Switch IGMP
Interface: mgmt, Remote Port (outgoing port): 7/48
Holdtime : 138 sec
Version :
WS-C6509 Software, Version McpSW: 6.1(1b) NmpSW: 6.1(1b)
Copyright (c) 1995-2000 by Cisco Systems
advertisement version: 2
VTP Management Domain: 'LAB-SN5428-2A'
Native VLAN: 220
Duplex: half
----------------------------------------
Device ID: 000421b45a00(lab32)
Entry address(es):
IP address: 10.2.0.185
Platform: SN5428-2, Capabilities: Router
Interface: mgmt, Remote Port (outgoing port): fei0
Holdtime : 174 sec
Version :
Cisco SN5428-2 Software Version 3.2.1
advertisement version: 2
Table 12-22 Description of Fields in the “show cdp neighbors” Command Output
Field Description
Capability Codes The type of device that can be discovered.
Device-ID The name of the neighbor device and either the MAC address or the serial
number of this device. This field is truncated after 27 characters.
Capability The type of the device listed in the CDP Neighbors table. Possible values are:
• R—Router
• T—Transparent bridge
• B—Source-routing bridge
• S—Switch
• H—Host
• I—IGMP device
• r—Repeater
Platform The product number of the device. This field is truncated after 21 characters.
Remote Port The outgoing port information.