Specifications

12-386
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cdp interface
show cdp interface
To display information about the SN 5428-2 Storage Router interfaces on which CDP is enabled, use the
show cdp interface command.
show cdp interface [if-name]
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines CDP can be enabled for all storage router interfaces, including the management, high availability, and
Gigabit Ethernet interfaces. Use the show cdp interface command to display a brief summary of all
interfaces on which CDP is enabled. To display status and operational information for a specific
interface, add the interface name argument.
Examples The following is example output from the show cdp interface command:
[SN5428-2A]# show cdp interface
Port CDB Status
-------- ----------
mgmt enabled
ha enabled
ge1 enabled
ge2 enabled
The following is example output for the management interface (mgmt):
[SN5428-2A]# show cdp interface mgmt
Port CDB Status
-------- ----------
mgmt enabled
if-name Display CDP status and operational information for the specified interface.
The following are valid interface names: mgmt, ha, ge1 and ge2.
Release Modification
3.2.1 This command was introduced.