Specifications

12-384

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 12 Command Line Interface Reference

show cdp entry

To display information about a specific neighboring device or all neighboring devices discovered using

CDP, use the show cdp entry command.

show cdp entry {device-id | all}

Syntax Description

Defaults None.

Command Modes Administrator or Monitor.

Command History

Usage Guidelines Use this command to display operational information about CDP neighbors known to the storage router.

Use show cdp neighbors command to display the device ID for the neighbor about which you want

additional information.

Examples The following is sample output from the show cdp entry command. Information about all neighboring

devices is displayed, including device ID, address and protocol, platform, interface, holdtime, and

version.

[SN5428-2A]# show cdp entry all

----------------------------------------

Device ID: SCA0428017Q(lab-SN5428-2A.mylab.com)

Entry address(es):

IP address: 10.2.1.28

Platform: WS-C6509, Capabilities: Trans-Bridge Switch IGMP

Interface: ge2, Remote Port (outgoing port): 4/13

Holdtime : 176 sec

Version :

WS-C6509 Software, Version McpSW: 6.1(1b) NmpSW: 6.1(1b)

advertisement version: 1

device-id The device ID of the CDP neighbor about which you want information.

all Display all CDP neighbors.

Release Modification

3.2.1 This command was introduced.