Specifications

12-317
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter target {lunid | serial | wwpn} #?
scsirouter target {lunid | serial | wwpn} #?
To use an index method of mapping a logical target or a logical target and LUN combination to storage,
use the scsirouter target {serial | lunid | wwpn} #? command. This command creates an indexed list of
storage resources, assigning a unique index number to each LUN available. Specify the storage resources
to map by using the appropriate index numbers.
scsirouter name target name wwpn #?
scsirouter name target name [lun nn] wwpn #?
scsirouter name target name lun nn {serial | lunid} #?
scsirouter name target name wwpn #nn [wwpn #nn]
scsirouter name target name lun nn wwpn #nn [wwpn #nn] [force]
scsirouter name target name lun nn {serial | lunid} #nn [force]
Syntax Description
Defaults None.
Command Modes Administrator.
name Name of the SCSI routing instance to which you are adding the storage
target.
target name A user-specified name of the logical target. Enter a maximum of
31 characters or a valid iSCSI Name. There is a maximum of 100 targets per
storage router or per high availability cluster.
lun nn The LUN number associated with the logical target. The LUN number is
optional if mapping to a World Wide Port Name (WWPN) address type. The
LUN number is required if mapping to a serial number or LUN identifier.
#? Request an indexed list of storage resources available on the Fibre Channel
(FC) network.
serial Use the serial number for the named storage resource. The storage resource
must support unique serial numbers for each LUN.
wwpn Use the World Wide Port Name (WWPN) address type for the named
storage resource. You can specify a primary and optional secondary
WWPN.
lunid Use the unique LUN identifier, assigned when the LUN is discovered by the
FC interface.
#nn The index number from the displayed list. The storage resource listed after
the number specified is the physical storage address to which the logical
target or logical target and LUN combination is to be mapped.
force (Optional) Keyword used to allow LUN-mapping of the same storage array
control LUNs in multiple targets.