Specifications

12-302
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter reserveproxy
Related Commands Command Description
delete scsirouter Delete the named SCSI routing instance or the specified element of the
SCSI routing instance.
restore scsirouter Restore the named SCSI routing instance from the named configuration file.
save scsirouter Save configuration information for the named SCSI routing instance.
scsirouter Create a SCSI routing instance.
scsirouter enable Stop or start the named SCSI routing instance.
scsirouter failover Add the storage router to the HA failover list for the specified SCSI routing
instance.
scsirouter lun reset Configure the named SCSI routing instance to send a “LUN reset”
command when opening all targets.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
setup scsi Run the wizard to configure a SCSI routing instance.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.