Specifications

12-296
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter lun reset
Related Commands Command Description
delete scsirouter Delete the named SCSI routing instance or the specified element of the
SCSI routing instance.
restore scsirouter Restore the named SCSI routing instance from the named configuration file.
save scsirouter Save configuration information for the named SCSI routing instance.
scsirouter Create a SCSI routing instance.
scsirouter enable Stop or start the named SCSI routing instance.
scsirouter primary Identify a storage router as the preferred storage router to run the named
SCSI routing instance.
scsirouter
reserveproxy
Enable the SCSI reserve/release commands for the specified SCSI routing
instance and specify whether these commands are forwarded to the storage
resource.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
setup scsi Run the wizard to configure a SCSI routing instance.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.