Specifications

12-294
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter failover
Examples The following example builds the HA failover list for the SCSI routing instance named foo. The primary
storage router in the HA failover list is SN5428-2A.
[SN5428-2A]# scsirouter foo failover primary SN5428-2A
Related Commands Command Description
clear scsirouter
failover
Remove the designated primary or secondary storage router from the HA
failover list for the specified SCSI routing instance.
delete scsirouter Delete the named SCSI routing instance or the specified element of the
SCSI routing instance.
failover scsirouter Cause the named SCSI routing instance to cease running on the storage
router.
restore scsirouter Restore the named SCSI routing instance from the named configuration file.
save scsirouter Save configuration information for the named SCSI routing instance.
scsirouter Create a SCSI routing instance.
scsirouter enable Stop or start the named SCSI routing instance.
scsirouter primary Identify a storage router as the preferred storage router to run the named
SCSI routing instance.
scsirouter serverif Assign a Gigabit Ethernet interface, IP address, and optionally a VLAN to
the named SCSI routing instance.
setup scsi Run the wizard to configure a SCSI routing instance.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.