Specifications

12-285
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
scsirouter
scsirouter
To create a SCSI routing instance, use the scsirouter command.
scsirouter name
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines SCSI routing is the routing of SCSI requests and responses between IP hosts in an IP network and storage
devices in a Fibre Channel storage network. The SCSI routing instance becomes a binding point for the
association of other configuration parameters. A SCSI routing instance provides IP hosts access to Fibre
Channel storage.
There can be a maximum of 12 SCSI routing instances defined per storage router; if the storage router
is a member of a cluster, no more than 12 instances can be defined across the cluster.
Note If the storage router is deployed for transparent SCSI routing, there can be only one SCSI routing
instance. The SCSI routing instance is named transparent and is automatically created during initial
system configuration.
Examples The following command creates a SCSI routing entity named myCompanyWebserver2.
[SN5428-2A]# scsirouter myCompanyWebserver2
name The name of the SCSI routing instance created by this command. Enter a
maximum of 31 characters.
Release Modification
3.2.1 This command was introduced.