Specifications

2-4
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 2 First-Time Configuration
Collecting Configuration Information
NTP server IP address The IP address of the NTP server available to the
storage router. This allows the storage router to
keep the date and time synchronized with the rest
of the network.
Optional
Time zone, current date
and time
The format for the date is mm/dd/yyyy, and the
time is hh:mm:ss.
Optional
Enable Telnet on all
interfaces
Enable Telnet access on all interfaces. By default,
Telnet access is enabled on only the management
interface.
Optional Yes or no
SNMP read community
name
The name of the community having read-only
access to the storage router network. The
SN 5428-2 will respond to this community’s GET
commands. The default is public.
Optional
SNMP write community
name
The name of the community having write access to
the storage router network. The SN 5428-2 will
respond to this community’s SET commands. The
default is private.
Optional
First SNMP trap
manager IP address
The IP address of the first destination host used for
SNMP notifications (traps). Required if you wish
to use SNMP traps.
Optional
Trap version for first
SNMP IP address
The version number of the traps that are to be sent
to the first SNMP trap manager IP address. The
default is 1.
Optional
Second SNMP trap
manager IP address
An optional IP address of the second destination
host used for SNMP notifications (traps).
Optional
Trap version for second
SNMP IP address
The version number of the traps that are to be sent
to the second SNMP trap manager IP address. The
default is 1.
Optional
Send authentication
failure option
Enable an authentication failure trap to be sent
when a user specifies an incorrect community.
Optional Yes or no
Send link up/down traps
option
Enable link up/down traps to be sent for the
Management interface when the link goes up and
when it goes down.
Optional Yes or no
Enable link up/down traps to be sent for the HA
interface when the link goes up and when it goes
down.
Optional Yes or no
Enable link up/down traps to be sent for the
Gigabit interface when the link goes up and when
it goes down.
Optional Yes or no
Enable link up/down traps to be sent for the Fibre
Channel interface when the link goes up and when
it goes down.
Optional Yes or no
Table 2-1 First-Time Configuration Checklist (continued)
Configuration Item Description Required or Optional
Your Configuration
Value