Specifications

12-256
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
restore fcswitch
restore fcswitch
To cause the previously saved configuration information associated with the SN 5428-2 Storage Router
Fibre Channel (FC) interfaces to be copied from the specified configuration file into the bootable
configuration, use the restore fcswitch command. The configuration file must exist in the savedconfig
directory. Use the show savedconfig command to display the contents of the savedconfig directory.
restore fcswitch {all | config | interface | zones} from filename
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines The restore fcswitch command overwrites the specified FC configuration information.
Use the config keyword to restore global FC configuration information, including:
• The domain ID and domain ID lock setting
• Resource allocation timeout value
• Distributed services timeout value
• Fabric stability timeout value
• Error detect timeout value
• Buffer-to-buffer credit value for all FC ports
• Zoning management operational settings, including merge mode and level of communication
between the storage router and devices in the fabric when there is no active zone set
all Keyword used to restore all global and interface-specific FC configuration
information from the specified configuration file.
Note Zoning information is not restored.
config Keyword used to restore global FC configuration information, including
time out values and domain ID.
interface Keyword used to restore configuration information for the FC interfaces,
including link speed and port type settings.
zones Keyword used to restore all alias, zone and zone set configuration
information. If the storage router is connected to the FC switched fabric, the
restored zoning database is propagated to the FC switched fabric
from filename The name of the configuration file containing the information to be
restored. This file must exist in the savedconfig directory.
Release Modification
3.2.1 This command was introduced.