Specifications

12-148
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch ratov
fcswitch ratov
To specify a Fibre Channel (FC) resource allocation timeout value for the storage router, use the
fcswitch ratov command.
fcswitch ratov {nn |default}
Syntax Description
Defaults The default resource allocation timeout value is 10000 milliseconds.
Command Modes Administrator.
Command History
Usage Guidelines The resource allocation timeout value is the amount of time the storage router is to wait to allow two FC
ports to allocate sufficient resources to establish a link.
Resource allocation timeout values should be the same for all SN 5428-2 Storage Routers or switches in
the fabric.
Examples The following example sets the resource allocation timeout value to 9000 milliseconds:
[SN5428-2A]# fcswitch ratov 9000
The following example resets the resource allocation timeout value to the default of 10000 milliseconds:
[SN5428-2A]# fcswitch ratov default
Related Commands
nn The amount of time the storage router is to wait to allow two FC ports to
allocate enough resources to establish a link.
default Keyword, indicating the storage router is to wait up to 10000 milliseconds
to allow two FC ports to allocate enough resources to establish a link.
Release Modification
3.2.1 This command was introduced.
Command Description
fcswitch dstov Specify the amount of time the storage router is to wait for Fibre Channel
Distributed Services.
fcswitch edtov Specify an error detect timeout value for all Fibre Channel interfaces.
fcswitch enable Enable all FC interfaces.
fcswitch fstov Specify the fabric stability timeout value.
show fcswitch Display global configuration information for storage router FC interfaces.