Specifications

12-147
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch log interface
fcswitch log interface
To restrict the SN 5428-2 Storage Router integrated Fibre Channel (FC) switch logging to information
related to a specific FC interface, use the fcswitch log interface command.
fcswitch log interface {if-name |default}
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines The fcswitch log interface command is designed for debug purposes, and should be used under the
guidance of a Cisco Technical Support professional.
Examples The following example restricts logging for the integrated FC switch to information associated with fc3:
[SN5428-2A]# fcswitch log interface fc3
Related Commands
if-name The name of the FC interface for which you are setting this parameter. Valid
values are fc1 through fc8. When you type the interface fc? command, the
CLI lists the interfaces available. You cannot specify a nonexistent
interface.
default Enable logging for all FC interfaces.
Release Modification
3.2.1 This command was introduced.
Command Description
clear fcswitch Clear the switch log files of all entries or clear stored zoning configuration
information.
fcswitch devlog Specify logging parameters for the switch development log file.
fcswitch devlog enable Enable development logging for the integrated FC switch component
fcswitch syslog Specify logging parameters for the switch system log file.
fcswitch syslog enable Enable system logging for the integrated FC switch component.
show debug fcswitch Display internal FC interface parameters, including switch log entries.