Specifications

12-133
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcswitch beacon enable
fcswitch beacon enable
To enable all Fibre Channel port Logged-In (LOG) LEDs to flash, use the fcswitch beacon enable
command. To disable LOG LED flashing, use the no form of this command.
fcswitch beacon enable
no fcswitch beacon enable
Syntax Description This command has no arguments or keywords.
Defaults Beacon flashing is disabled, by default. See the SN 5428-2 Storage Router Hardware Installation Guide
for default LOG LED indication descriptions.
Command Modes Administrator.
Command History
Usage Guidelines Use this command to assist in locating a physical unit. This command is primarily used for
troubleshooting purposes.
Examples The following example causes all Fibre Channel port LOG LEDs on the storage router to flash:
[SN5428-2A]# fcswitch beacon enable
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
show debug fcswitch Display internal Fibre Channel interface parameters.
show fcswitch Display global configuration information for storage router FC interfaces.