Specifications

12-127
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcip destination tcpserver
Note When configuring an FCIP instance, you must configure the network interface before you configure the
peer destination and protocol.
Examples The following example configures the FCIP instance named fcip1 with a destination named dest1 at IP
address 10.1.5.222, using TCP/IP connection protocol. The FCIP instance is configured as a TCP server,
and will listen for the TCP connection from the destination.
[SN5428-2A]# fcip fcip1 destination dest1 tcpserver 10.1.5.222
Related Commands Command Description
fcip Create an FCIP instance.
fcip destination config Configure operational parameters for the named FCIP instance.
fcip networkif Assign a Gigabit Ethernet interface and IP address to the named FCIP
instance.
show fcip Display configuration and operational information for the named FCIP
instance.