Specifications

12-115
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
fcip
Examples The following example creates an FCIP instance named fcip1:
[SN5428-2A]# fcip fcip1
Related Commands Command Description
clear counters fcip Reset accumulated operational statistics for the specified SCSI routing
instance.
delete fcip Delete the named FCIP instance or the specified element of the FCIP
instance.
delete fcip Enable debugging for the named FCIP instance.
fcip description Add user-defined identification information to the named FCIP instance.
fcip destination config Configure operational parameters for the named FCIP instance.
fcip destination raw Add a peer destination to the named FCIP instance, with a connection type
of raw IP.
fcip destination
tcpclient
Add a peer destination to the named FCIP instance, with a connection type
of TCP/IP. The named FCIP instance initiates the TCP connection.
fcip destination
tcpserver
Add a peer destination to the named FCIP instance, with a connection type
of TCP/IP. The named FCIP instance listens for the TCP connection from
the named destination.
fcip enable Stop or start the named FCIP instance.
fcip networkif Assign a Gigabit Ethernet interface and IP address to the named FCIP
instance.
restore fcip Restore the named SCSI routing instance from the named configuration file.
save fcip Save configuration information for the named FCIP instance.
show debug fcip Display debugging information for the named FCIP instance.
show fcip Display configuration and operational information for the named FCIP
instance.