Specifications

12-105
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
enable
enable
To change the management session from Monitor mode to Administrator mode, use the enable
command. Monitor mode, which is the default mode, provides view-only access to the storage router
management interface. Administrator mode allows you to create entities and make changes to the
configuration of the storage router.
enable
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Monitor.
Command History
Usage Guidelines Issue the enable command after a successful CLI login to change to Administrator mode. You are
prompted to enter the Administrator mode password, if required. Use the exit command to return to
Monitor mode.
Examples The following example changes the session from Monitor mode to Administrator mode.
[SN5428-2A]# enable
Enter admin password: *****
[Entering Administrator mode]
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
aaa authentication
enable
Configure AAA authentication services for Administrator mode access to
the SN 5428-2 Storage Router via the CLI enable command.
exit Leave Administrator mode and enter Monitor mode.
logout Terminate the management session.
show aaa Display AAA configuration information.