Specifications

12-81
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
debug scsirouter target
debug scsirouter target
To enable trace facilities for debugging a specific SCSI routing instance target and LUN combination,
use the debug scsirouter target command. To disable debugging, use the no debug scsirouter target
form of this command.
debug scsirouter name target name lun nn scsitrace
no debug scsirouter name target name lun nn scsitrace
Syntax Description
Defaults All trace facilities are enabled by default.
Command Modes Administrator.
Command History
Usage Guidelines When enabled at this level, SCSI tracing will trace traffic to and from the specified target and LUN
combination associated with the named SCSI routing instance. Use the show debug scsirouter
command to view the trace buffer output.
Examples The following example enables SCSI tracing facilities for the target and LUN combination myTarget,
LUN 0, associated with the SCSI routing instance named foo:
[SN5428-2A]# debug scsirouter foo target myTarget lun 0 scsitrace
Related Commands
name The name of the SCSI routing instance to be debugged.
target name The name of the target to be included in the trace.
lun nn The specific LUN associated with the target.
scsitrace Keyword indicating tracing services will be enabled.
Release Modification
3.2.1 This command was introduced.
Command Description
debug aaa Enable debugging for AAA authentication services.
debug scsirouter Enable debugging for the named SCSI routing instance.
debug scsirouter
iscsitrace
Enable iSCSI trace facilities for debugging connections to and from the
specified SCSI routing instance.
show debug scsirouter Display trace buffer output.