Specifications

12-64
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
debug aaa
debug aaa
To enable debugging for authentication, authorization, and accounting (AAA) services, use the
debug aaa command. To disable debugging for AAA authentication services, use the no form of this
command.
debug aaa
no debug aaa
Syntax Description This command has no arguments or keywords.
Defaults Debugging is not enabled.
Command Modes Administrator.
Command History
Usage Guidelines Use this command to debug problems with iSCSI, Enable and Login authentication or general AAA
authentication services. Create log route entries for notification level debugging to send the trace and
debug messages to the desired destination, using the logging level command.
Examples The following example enables AAA debugging:
[SN5428-2A]# debug aaa
Release Modifications
3.2.1 This command was introduced.