Specifications

12-47
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
clear conf {all | system}
Note The clear conf command will not reset any Secure Shell (SSH) public and private key pairs generated
for the storage router. Use the ssh keygen command to generate new SSH keys after the storage router
is restored to the selected factory default settings.
Examples The following example removes all storage router configuration information, returning the storage router
to its initial default configuration. The example uses the default Administrator mode password, cisco.
[SN5428-2_A1]# clear conf all cisco
Clearing configuration...
Current configuration and named configurations cleared.
System halting.........
Related Commands Command Description
clear conf Run the wizard to reset the storage router to factory defaults.
setup access Run the wizard to configure Monitor mode and Administrator mode
passwords.
setup cluster Change the configuration of the storage router’s high availability
environment.
setup fcip Run the wizard to manually configure FCIP instances.
setup iscsi-port Run the wizard to manually configure the port used for iSCSI traffic.
setup mgmt Run the wizard to configure the management interface.
setup netmgmt Run the wizard to configure network management.
setup scsi Run the wizard to configure a SCSI routing instance.
setup time Run the wizard to configure the system date and time.