Specifications

12-44
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
clear conf
clear conf
To return certain configuration settings to factory defaults, use the clear conf wizard. The clear conf
wizard prompts you to enter the Administrator mode password and then to indicate which settings to
restore to factory defaults.
clear conf
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines The clear conf wizard is only available when the storage router is deployed for SCSI routing. If the
storage router is deployed for transparent SCSI routing, use the clear conf {all | system} command to
return the storage router configuration to factory default settings.
Follow these guidelines when using the clear conf wizard:
• Select apps to remove all SCSI routing instances but retain system configuration settings.
• Select system to remove all SCSI routing instances and system configuration settings.
• Select saved to delete all backup configuration files from disk.
• Select all to remove all SCSI routing instances, system configuration settings, and saved
configuration files.
The system will reboot if you select apps, system, or all.
System configuration settings include:
• The management and HA interface IP addresses
• Configuration information for Fibre Channel interfaces
• Saved zone configuration information
• Domain name servers
• NTP server and time zone information
• SNMP information
• Administrator and Monitor passwords, and administrator contact information
• AAA authentication configuration information
• VLAN and VTP information
Release Modification
3.2.1 This command was introduced.