Specifications

12-35
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
accesslist iscsi-name
In a cluster environment, access list management functions are handled by a single storage router. To
determine which storage router is performing access list management functions, issue the show cluster
command. If you issue an accesslist iscsi-name command from a storage router that is not performing
access list management functions, the CLI displays an informational message with the name of the node
that is currently handling those functions.
See Chapter 11, “Maintaining and Managing the SN 5428-2 Storage Router,” for more information
about operating the storage router in a cluster.
Examples The following command add the specified iSCSI Name to the access list named foo:
[SN5428-2A]# accesslist foo iscsi-name ign.1987-05.com.cisco.01.88e8b25a6bf3372a34567123f
Related Commands Command Description
accesslist Create an access list entity.
accesslist A.B.C.D/bits Add IP addresses to an access list.
accesslist
chap-username
Add CHAP user name entries to an access list.
accesslist description Add a description to an access list.
delete accesslist Delete a specific access list entry or an entire access list.
restore accesslist Restore the named access list or all access lists from the named
configuration file.
save accesslist Save configuration data for the named access list or all access lists.
scsirouter target
accesslist
Associate an access list with a specific SCSI routing instance target or all
targets.
show accesslist Display the contents of the named access list or all access lists.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.