Specifications

11-37
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 11 Maintaining and Managing the SN 5428-2 Storage Router
Gathering Troubleshooting Information
Capturing the Storage Router Configuration
You can use the show runningconfig or show bootconfig command to display the storage router current
running configuration or the bootable configuration. You can then redirect this display to create a script
file in the SN 5428-2 script directory. The resulting file can be used as a basis to create command scripts
to automate common tasks. See “Using Scripts to Automate Tasks” for more information about using
scripts on the storage router.
Using Debug Facilities
The storage router includes debug facilities for SCSI routing instances, RIP, and packet tracing for
Gigabit Ethernet interfaces. Running debug traces can impact the operation of the storage router. If you
experience problems with a SCSI routing instance that cannot be resolved, Cisco technical support
personnel may ask you to capture some debug traces. They will assist you to properly configure the
storage router to accomplish this task.
See Chapter 12, “Command Line Interface Reference,” for more information about the debug
commands and using the storage router debug facilities.