Specifications

11-16
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 11 Maintaining and Managing the SN 5428-2 Storage Router
Powering Down the SN 5428-2 Storage Router
Example 11-3 Verify SNMP Configuration
[SN5428-2_PR1]# show snmp
First Trap Host: 10.1.32.200
Second Trap Host: 10.2.12.242
Get Community String: public
Set Community String: private
Send Authentication Traps: enabled
Send Entity FRU Traps: enabled
Link Up/Down Enable for mgmt: enabled
Link Up/Down Enable for ha: enable
Link Up/Down Enable for fc1: enabled
Link Up/Down Enable for fc2: enabled
Link Up/Down Enable for fc3: enabled
Link Up/Down Enable for fc4: enabled
Link Up/Down Enable for fc5: enabled
Link Up/Down Enable for fc6: enabled
Link Up/Down Enable for fc7: enabled
Link Up/Down Enable for fc8: enabled
Link Up/Down Enable for ge1: enabled
Link Up/Down Enable for ge2: enabled
System location is: Test lab
Example 11-4 Verify Administrator Contact Information
[SN5428-2_PR1]# show admin
Administrator Contact Information
Name: Pat Hurley
Email: [e-mail]
Phone: [phone]
Pager: 123.456.3444 pin 2234
Powering Down the SN 5428-2 Storage Router
If you need to make changes to the physical location or cabling of the storage router, you may need to
schedule a time to power down the unit.
Use the following procedure to properly power down a storage router. These steps assure that the file
system is in the appropriate state prior to shutdown.
Command Description
Step 1
enable Enter Administrator mode.
Step 2
halt Respond to any prompts to save information as desired. The
SN 5428-2 can be safely powered down when the [HALTED]#
command prompt appears.