Specifications

11-3
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 11 Maintaining and Managing the SN 5428-2 Storage Router
Installing Updated Software
Example 11-1 Results of “show software version all” Command
[SN5428-2_A01]# show software version all
Version Boot Hash Sign Crash Size Date
-------------------- ---- ---- ---- ----- ---------- ---------------------
3.3.0.23-K9 OK OK N/A 0 10101.0 KB Feb 25 11:38 CDT 2003
3.3.1-K9 OK OK N/A 0 11102.0 KB Feb 29 15:44 CDT 2003
Http Url: http://www.cisco.com
Http Username: SWAdmin01
Http Password: *********
Proxy Address: 10.1.12.32
Proxy Port: 3122
Proxy Url: http://www.cisco.com
Proxy Username: SWAdmin01
Proxy Password: *********
Tftp Hostname: 10.1.1.122
Tftp Directory:
Software Space Available: 33264.0 KB
Current Version: 3.3.1-K9
Boot Version: 3.3.1-K9
To install updated SN 5428-2 software, perform the following steps:
Step 1 (Optional) Identify the location from which to retrieve the updated SN 5428-2 software. (This is either
Cisco.com or another download location of your choosing, as previously described.)
Step 2 Make the selected version of software available on the SN 5428-2 local file system.
Step 3 (Optional) Set the new version as the version to be booted during the next system restart, and reboot the
SN 5428-2.
Note Always review the README file before making updated software available to the SN 5428-2.
Specifying the Location to Retrieve Updated Software
You must specify the location from which to retrieve updated software. If the current download location
is not appropriate, you can reset it.
Use the following procedures to specify the desired download location:
• Using HTTP, page 11-4
• Using Proxy Services, page 11-4
• Using TFTP, page 11-4
When you are finished, verify the new settings using the show software version all command, then save
them using the save system bootconfig or save all bootconfig command.