Specifications

9-4
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 9 Configuring Authentication
Configuration Tasks
Configuration Tasks
To configure iSCSI, Enable or Login authentication and the associated AAA authentication services on
the storage router, perform the following steps:
Step 1 Configure the desired authentication services, such as RADIUS, TACACS+ and the local username
database.
Step 2 (Optional) Create named groups of RADIUS and TACACS+ servers.
Step 3 Create AAA authentication lists.
Step 4 (Optional) Test authentication using configured AAA authentication services.
Step 5 (Optional) Configure the user name and password for SCSI routing instances that will participate in
two-way authentication.
Step 6 Enable authentication for individual SCSI routing instances.
Step 7 Verify and save AAA and iSCSI authentication configuration.
Figure 9-1 illustrates AAA authentication configuration elements used for iSCSI authentication and
Figure 9-2 illustrates the example configuration of iSCSI authentication and AAA authentication
services used in this chapter.