Specifications

ix
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
About This Guide
This preface describes the objectives, audience, organization and command syntax conventions of the
Cisco SN 5428-2 Storage Router Software Configuration Guide. It also provides information on how to
obtain related documentation and technical assistance.
Note The model number of the SN 5428-2 Storage Router may appear on your terminal as 5428-2-K9 during
console sessions with the storage router and in command line interface (CLI) output.
Objectives
This software configuration guide describes how to configure software in a Cisco SN 5428-2 Storage
Router. It does not describe every possible configuration but does describe those tasks commonly
required to configure the software.
Note This guide does not describe how to configure the iSCSI driver to be installed in each host requiring IP
access to storage. Download the Cisco iSCSI drivers from Cisco.com and install and configure the
drivers according to the accompanying readme files, release notes, and example configuration files.
Audience
This guide is intended primarily for the following audiences:
• System administrators who are familiar with the fundamentals of router-based internetworking and
network storage devices, but who might not be familiar with the specifics of Cisco products or the
routing protocols supported by Cisco products.
• System administrators who are responsible for configuring network storage equipment.