Specifications

7-3
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 7 Configuring Transparent SCSI Routing
Verifying Configuration
Verifying Configuration
Use the following procedure to verify the configuration of the SCSI routing instance.
Example 7-1 Verifying Configuration of Transparent SCSI Routing Instance
[SN5428-2]# show scsirouter transparent
SCSI Router Information
Status Codes: A=active, I=inactive, C=create failed, D=not enabled, S=slave
CDB Lun
Router Stat Auth Retry Reset Description
-------------------- ---- ---- ----- ----- -----------
transparent A none 30 no (not set)
SCSI Router Authentication Information
Router Authentication Username Password
-------------------- --------------- --------------- --------
transparent none none none
Router ServerIf Vlan Vid IP/Netmask Secondary TCP Port SLP
---------- ---------- -------- -------------------------------- ---------- -------- ---
transparen ge1 10.1.31.243/24 none 3260 OFF
transparen ge2 10.1.26.243/24 none 3260 OFF
Target Attribute Information
Accesslist Accesslist
Router Target Status Read-Write Read-Only Profile CRC Description
---------- ---------------- -------- ---------- ---------- ------- ---------- -----------
transparen 2200002037a761c7 enabled any none High prefer-off (not set)
transparen 2200002037a7618f enabled any none High prefer-off (not set)
transparen 2200002037a7518d enabled any none High prefer-off (not set)
Target Mapping Information
Router Target Mapping iSCSI Name
---------- ---------------- ---------- -----------
transparen 21000020371912ee Tgt eui.21000020371912ee
transparen 21000020371912a2 Tgt eui.21000020371912a2
transparen 21000020371912a3 Tgt eui.21000020371912a3
transparen 21000020371912d1 Tgt eui.21000020371912d1
transparen 2100002037c59e27 Tgt eui.2100002037c59e27
Targets - Target Mapped
Router Target WWPN Primary WWPN Secondary
---------- ---------------- ---------------- ----------------
transparen 21000020371912ee 21000020371912ee
transparen 21000020371912a2 21000020371912a2
transparen 21000020371912a3 21000020371912a3
transparen 21000020371912d1 21000020371912d1
transparen 2100002037c59e27 2100002037c59e27
Command Description
Step 1
enable Enter Administrator mode.
Step 2
show scsirouter transparent
or
show scsirouter all
Display configuration for SCSI routing instance (Example 7-1).
Note As shown in the second command, you can type the
keyword, all, as a shortcut, instead of the SCSI routing
instance name, transparent.