Operation Manual

Customizing Standard Features
Configuring Phone Information and Display Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 52
3
To configure the screen saver:
Cisco SPA303 or Cisco SPA5XXG
STEP 1 Click Admin Login > advanced > Voice > Phone.
STEP 2 In the General section, in the Screen Saver Enable field, choose yes to enable.
STEP 3 In the Screen Saver Wait field, enter the number of seconds of idle time to elapse
before the screen saver starts.
STEP 4 In the Screen Saver Icon field, choose the display type:
• A background picture.
• The station time in the middle of the IP phone screen.
• A moving padlock icon. When the phone is locked, the status line displays a
scrolling message “Press any key to unlock your phone.”
• A moving phone icon.
• The station date and time in the middle of the IP phone screen.
• A blank power save screen.”
STEP 5 Click Submit All Changes.
Cisco SPA525G or Cisco SPA525G2:
STEP 1 Click Admin Login > advanced > Voice > User.
STEP 2 Under Screen, in the Screen Saver Enable field, choose yes to enable.
STEP 3 In the Screen Saver Type field, choose the display type:
• Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles from black to gray.
• Picture Rotation—The screen rotates through available pictures on the
phone.
• Digital Frame—Shows the background picture.
STEP 4 In the Screen Saver Trigger Time field, enter the number of seconds that the phone
remains idle before the screen saver turns on.
Downloaded from www.Manualslib.com manuals search engine